|
Posted by RBM on March 28, 2007, 4:28 pm
The paper insulator in brass shell sockets, common in lamps can deteriorate
and if the lamp is wired incorrectly and not polarized, the body of the
fixture can become live. The reason they went to polarized plugs is because
they weren't safe, or at least as safe as they could be.
> In North America up until about 20 years ago NO lamps came with polarized
> plugs, both prongs were the same size. I still have a number of lamps with
> non-polarized plugs on them and they still work and are still safe. They
> were implemented because some people touch the threaded base on the bulb
> when changing them, if the plug is in backwards it could be live and give
> the person a shock. It is always a bad practice to touch the bulb base
> even with polarized plugs because there is always a chance that it was
> wired wrong in the plug or in the light socket.
>
>> In American fixtures the tongue of an Edison type socket should be
>> connected to the hot leg as it's the most isolated part of the socket and
>> least likely part to inadvertently come in contact with any other part of
>> the fixture. If these lamps use a different type of socket, it may not
>> matter. You can also replace the plugs with polarized ones
>>
>>
>>
>>
>>> Hi,
>>>
>>> I have some lights which I bought in Japan. I have been using them
>>> over here for like 8 years now and they seem to work fine, I have
>>> replaced the light bulbs. One issue is that the plugs are not
>>> polarized, and I think in Japan the voltage is lower at 100v, and
>>> where I was living (Tokyo) was at 50Hz instead of the USA 60Hz.
>>>
>>> Are there any issues I should know about? Can I keep using these?
>>>
>>> If the plugs are not polarized how do these lamps work safely in
>>> Japan?
>>>
>>> Best, Mike.
>>>
>>
>>
>
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap