|
Posted by UNIVERSAL MIND on November 9, 2005, 10:41 am
If you were Registered and logged in, you could reply and use other advanced thread options
3 HP to 15 HP- and they never cease to amaze me.
We have a 3 HP and 5 HP that we put on a go-kart, that hauled an adult
and child quite briskly with a cent. clutch and chain drive- to the
point it overpowered the chassis.
The 12-15 HP engines are real torque monsters in the 2 tractors I've
worked on.
What amazes me about them is how simple they are- anyone out there soup
these up, if so, what results ?
I was given (2) 3HP Briggs that were both blown up and not running,
that were attached to water pumps. The head and valve seat on one was
broken, the other had a broken connecting rod. I took the rod/piston
from one, used the crankcase and head from another...
started right up and ran- and hauled ass on the go kart, with 2 people
on it.
amazing machines. Now I'm itching to get a Ford flathead V-8...
|
|
Posted by on November 9, 2005, 9:50 pm
If you were Registered and logged in, you could reply and use other advanced thread options
UNIVERSAL MIND wrote:
> amazing machines. Now I'm itching to get a Ford flathead V-8...
Flatheads are simple, but dated machines. Ford flatheads are a real
PITA compared to modern pushrods or overhead cams. Some flatheads are
very great looking machines- Indian flathead motorcycle engines are
one. The finned head is a great looking piece, but you loose quite a
bit of horsepower which is why most motors are overhead valves now.
The briggs engines are simple because they can be. Easy to keep
working, cheap to maintain.
Kirb
|
|
Posted by UNIVERSAL MIND on November 10, 2005, 6:27 pm
If you were Registered and logged in, you could reply and use other advanced thread options
breathe better, but the flatheads are way easier to work on- and less
parts means more reliable
|
|
Posted by on November 10, 2005, 11:08 pm
If you were Registered and logged in, you could reply and use other advanced thread options
UNIVERSAL MIND wrote:
> yes, I'm aware the OHV engines make about twice as much power and
> breathe better, but the flatheads are way easier to work on- and less
> parts means more reliable
I'll put a honda OHV against a briggs any day of the week. I work for a
union contractor and even the field workers want the Honda engines. WAY
more reliable in heavy use. Never had to tear one apart in 10 years.
Briggs? not the same fate.
I guess if you want to work on them the briggs are great, but I'll take
a Honda if I never want to see the insides....
Kirb
|
|
Posted by Mel M Kelly on November 11, 2005, 8:47 am
If you were Registered and logged in, you could reply and use other advanced thread options
bracket. In most cases for residential use the Briggs will outlast the
equipment it is mounted on. But for lasting power and starting ease the
Honda is worth the extra buck.
From Mel & Donnie in Bluebird Valley
|
| Similar Threads | Posted | | old briggs twin cylinder flathead, this a 16 or 18hp? (pix) | October 20, 2005, 12:53 pm |
| Flower Garden Design Ideas: How To Create An Amazing Garden! | May 9, 2008, 12:36 pm |
| 13.5 Hp Briggs and Stratton | April 24, 2007, 12:06 pm |
| 5 hp power briggs and stratton | September 25, 2005, 10:04 pm |
| Need Briggs troubleshooting info | May 13, 2006, 4:10 pm |
| 13.5 Hp Briggs and Stratton won't start | April 24, 2007, 12:07 pm |
| Briggs and Stratton boycott! | February 26, 2008, 4:32 pm |
| 6.5 Briggs & Stratton Lawn Mower | July 31, 2006, 1:24 pm |
| Briggs & Stratton Engine Problem | October 11, 2006, 11:33 pm |
| Briggs and Stratton needlessly crippled me! | April 21, 2007, 3:17 pm |
|
XML site map